BSSHQ - THINNER, SYNTHETIC RESIN ENAMEL
- MSDS: BSSHQ
- Manufacturer: HOME OIL CO
- Product Name: THINNER, SYNTHETIC RESIN ENAMEL
- National Stock Number: 8010-00-254-4218
Product Identification
Product ID:THINNER, SYNTHETIC RESIN ENAMEL
MSDS Date:01/30/1992
FSC:8010
NIIN:00-254-4218
MSDS Number: BSSHQ
Responsible Party
WICHITA, KS 67201
US
Emergency Phone: 316-838-4663 800-424-9300(CHEMTREC)
Info Phone: 316-838-4663
Preparer: BERNARD D HOFFMAN, JR
Cage: 0A9L8
Contractor
Telephone: 316-838-4663
Cage: 0A9L8
Ingredients
SPECIAL NAPHTHOLITE (VM & P NAPHTHA)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 58%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 11%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
N-BUTYL ALCOHOL
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 21%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOBUTYL ISOBUTYRATE
CAS: 97-85-8
RTECS: NQ5250000
Fraction By Weight: 10%
Hazards
Routes of Entry: Inhalation:UNKNOWN Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF NOSE AND THROAT.
HEADACHE, DROWSINESS, LOSS OF COORDINATION AND FATIGUE.
First Aid
First Aid:MOVE VICTIM AWAY FROM EXPOSURE AND INTO FRESH AIR. REMOVE
CONTAMINATED SHOES AND CLOTHING. CLEANSE AFFECTED AREA WITH SOAP
AND WATER. FLUSH EYES WITH WATER. INGESTION: DO NOT INDUCE
VOMITING. SEEK MED ICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:57.0F,13.9C
Lower Limits:0.9
Upper Limits:11.2
Extinguishing Media:DRY CHEMICAL, CO2, OR A UNIVERSAL TYPE FOAM
Fire Fighting Procedures:VAPORS ARE HEAVIER THAN AIR, MAY TRAVEL
CONSIDERABLE DISTANCES AND ACCUMULATE IN LOW AREAS.
Unusual Fire/Explosion Hazard:MAY CREATE VAPOR/AIR EXPLOSION HAZARD
INDOORS, OUTDOORS OR IN SEWERS.
Accidental Release
Spill Release Procedures:CONTAIN SPILL IF POSSIBLE; WIPE UP OR ABSORB
ON SUITABLE MATERIAL AND SHOVEL UP. 10,000 LB REPORTABLE QUANTITY.
Handling
Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED IN A
COOL, DRY LOCATION AWAY FROM SOURCES OF IGNITION. BOND & GROUND
EQUIPMENT WHEN TRANSFERRING TO ANOTHER CONTAINERS.
Other Precautions:BEFORE WORKING ON CONTAINERS WHICH HAVE PREVIOUSLY
HELD THIS PRODUCT, REFER TO ANSI Z 49.1.
Exposure Controls
Respiratory Protection:ABOVE EXPOSURE LIMITS USE RESPIRATOR OR GAS MASK
WITH APPROPRIATE CARTRIDGES.
Ventilation:VENT TO MAINTAIN CONCENTRATION BELOW TLV/PEL. USE
ELECTRICAL SYSTEMS SUITABLE FOR EXPLOSIVE CONCENTRATION CONDITIONS.
Protective Gloves:IMPERMEABLE CHEMICAL RESISTANT
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING SUCH AS UNIFORM,
OVERALLS, OR LAB COAT.
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:231 TO 300F
Vapor Pres:7.5 @ 68 F
Vapor Density:38 @ 68 F
Spec Gravity:0.784 (WATER=1)
Evaporation Rate & Reference:0.92 (BU AC=1)
Solubility in Water:1.7 (EST)
Appearance and Odor:CLEAR, LITTLE IF ANY COLOR. ODOR IS CHARACTERISTIC.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES, OXIDIZING AGENTS, SELECTED AMINES, ALKALI
METALS, HALOGENS
Hazardous Decomposition Products:CARBON DIOXIDE AND/OR CARBON MONOXIDE
Disposal
Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
STATE, AND FEDERAL REGULATIONS.
======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.